Energy UROPs

These students’ projects are generously supported by the Friends of MITEI UROP, which includes MITEI members Shell, ExxonMobil, and Chevron, as well as MITEI donors.

Filter by

Results

2024

Sarah Hernandez

Chemical Engineering, Concentration in Energy

Headshot of Sarah Hernandez

Research projects

There is a need for carbon dioxide (CO₂) capture processes that are energy efficient and low cost to adequately mitigate the excessive release of CO₂ into the atmosphere. Novel electrochemical CO₂ capture systems may meet this need, but, to the best of our knowledge, there are limited techno-economic comparisons between commercially deployed thermochemical systems and potentially lower-cost electrochemical systems. Using a process modeling platform, I develop and optimize a state-of-the-art thermochemical CO₂ capture system that allows for direct cost and performance evaluations against electrochemical alternatives. This modeling aids in quantifying key cost contributors for each system while also guiding future research directions and policy in the carbon capture field.

Advisor

Fikile Brushett, Associate Professor, Chemical Engineering

Direct supervisor

Katelyn Ripley, Graduate Student, Chemical Engineering
2024

Rachel Jiang

Electrical Engineering and Computer Science

Headshot of Rachel Jiang

Research projects

Carbon dioxide emissions from the steel industry need to be reduced to meet the net zero CO₂ emissions objective by 2025. The steel industry relies heavily on coal and energy-intensive processes, making decarbonization both challenging and necessary. Our research conducts techno-economic analysis (TEA) and life cycle analysis (LCA) on steel decarbonization by evaluating region-specific data on production capacity, energy use, and emissions in China, Japan, Germany, Turkey, South Korea, and Brazil. By identifying practical decarbonization strategies like fuel switching, technological innovations, and carbon capture and storage, our project develops an optimization framework to determine the most practical steel decarbonization scenarios according to cost, emissions, and demand in different regions. This project will provide actionable pathways that significantly reduce carbon emissions while balancing cost-effectiveness and meeting regional steel demand.

Advisor

Bill Green, Director, MIT Energy Initiative

Direct supervisor

Guiyan Zang, Research Lead, MIT Energy Initiative
Geothermal energy is a promising clean and renewable resource that has not been fully utilized in part due to the limitations of current electrical devices and their inability to operate at the necessary extreme temperatures (~500°C). To unlock the full potential of geothermal energy, our research focuses on enhancing the internal components of geothermal drilling technology by investigating gallium nitride (GaN), a semiconductor material that enables high performance electronic devices at these extreme temperatures. Specifically, we investigate novel dielectric passivation layers and their effects on GaN devices after exposure to such high temperatures over long periods of time. By developing robust, high-temperature semiconductor devices, we can significantly improve the safety, efficiency, and sustainability of electronic systems for next generation geothermal power plants.

Advisor

Tomás Palacios, Director, 6-A MEng Thesis Program; Professor, Electrical Engineering

Direct supervisor

John Niroula, Research Fellow, Electrical Engineering and Computer Science
2024

Jackson Kay

Electrical Engineering and Computer Science

Headshot of Jackson Kay

Research projects

My research focuses on optimizing the ZoMBI-Hop algorithm, a cutting-edge method for efficiently locating high-performing materials in vast compositional spaces. This research targets the improvement of perovskite solar cells, which have the potential to surpass traditional silicon-based photovoltaics in cost-efficiency and performance. By enhancing ZoMBI-Hop to identify multiple promising material compositions (or “needles”) within a given dataset, we aim to streamline the discovery process, reducing time and resource consumption while increasing the likelihood of finding materials with desirable properties. To evaluate these improvements, I have devised a comprehensive benchmarking system for ZoMBI-Hop. This system assesses the algorithm’s accuracy, complexity, speed, and adaptability to higher-dimensional search spaces. Insights from this analysis guide the refinement of model hyperparameters and the exploration of new strategies for managing multi-optimum searches. These enhancements will ultimately contribute to the creation of cheaper, more efficient perovskite solar cells, bolstering the economic and environmental viability of renewable energy technologies. Beyond this, my work integrates machine learning models with autonomous material sampling apparatuses, offering a scalable solution for addressing complex discovery challenges across various domains. By combining advanced algorithms with physical experimentation, this project demonstrates the transformative potentia

Advisor

Tonio Buonassisi, Professor, Mechanical Engineering

Direct supervisor

Alexander Siemenn, Graduate Student, Mechanical Engineering
2024

Nebus Kitessa

Mechanical Engineering, Product Design

Headshot of Nebus Kitessa

Research projects

Despite significant advancements in the size and accessibility of solar panels, only 6% of our energy currently comes from solar power. There have been efforts to integrate solar panels into everyday items like clothing and bags, but most of these solutions fail to generate enough power to fully charge a phone. My research this summer focused on designing a solar-powered bag that maximizes surface area to generate sufficient power for charging small electronic devices. This innovation will help integrate solar panels into everyday items, reducing the need for separate installations and saving households money. By making solar energy more practical and accessible, we can promote cleaner energy use in daily life.

Advisor

John Ochsendorf, Professor, Architecture

Direct supervisor

Nia Iman Rich, Graduate Student, Architecture and Planning
2024

Danielle Knutson

Urban Studies and Planning with Computer Science

Research projects

The rapid decarbonization of the power grid is essential to emissions reduction goals, which will entail a transition from fossil fuels to distributed energy resources (DERs) such as renewables, batteries, and electric vehicles. However, current datasets on DERs are scarce and often incomplete, which hinders their accurate modeling and optimization in grid studies. My work tackles this by (i) compiling datasets from many public sources and (ii) leveraging various statistical and machine learning methods to fill gaps in existing data for multiple regions in the United States, in order to empower researchers, policy makers, and industry professionals. In addition to understanding the current state of DERs, I’m working on predicting future growth trends until 2050 and providing a large, high-quality, and open-source database for researchers. This database will be highly valuable not only to support grid decision-making and accelerate DER integration but also to enhance energy affordability, reliability, and equity. It will improve quality of life by fostering cleaner air, lower emissions, and more resilient communities, thus supporting a sustainable future.

Advisor

Anuradha Annaswamy, Senior Research Scientist, Mechanical Engineering

Direct supervisor

Vineet Jagadeesan Nair, PhD Student, Mechanical Engineering
2024

Lauryn Kortman

Materials Science and Engineering

Headshot of Lauryn Kortman

Research projects

Quantifying cryogenic stored energy release in irradiated YBa2C3O7 through molecular dynamics annealing simulations

Magnetic fusion energy has the potential to provide abundant, carbon-free electricity, anywhere, any time. But the bombardment of fusion neutrons can affect the longevity of fusion magnets, responsible for the confinement field that sustains fusion in the core. My research utilizes molecular dynamic simulations to quantify the energy stored in radiation-induced defects. This quantification will inform strategies to prevent local hotspots in superconducting magnets (called quenches) that can severally damage these expensive and critical components. By mitigating the risk of quenches, my research increases the operational certainty and overall attractiveness of fusion power.

Advisor

Michael Short, Associate Professor, Nuclear Science and Engineering

Direct supervisor

Alexis Devitre, Graduate Student, Nuclear Science and Engineering
2024

Ronaldo Lee

Materials Science and Engineering

Headshot of Ronaldo Lee

Research projects

Understanding the impact of environmental parameters during fabrication for highly reproducible perovskite solar cells

My UROP addresses the challenge of reproducibility in the fabrication of perovskite solar cells (PSCs), which are promising for high-efficiency, low-cost solar energy conversion. The efficiency of PSCs can vary significantly due to environmental factors during fabrication, such as temperature, humidity, and oxygen levels, affecting the crystal formation process crucial for performance and stability. My role involves designing, fabricating, and characterizing PSCs, controlling environmental parameters, and using a large language model (LLM) to analyze results and output optimized environmental factors for the greatest efficiency. This research aims to develop standardized fabrication protocols to enhance reproducibility, contributing to the scalability and commercial viability of PSC technology. By improving the reliability and accessibility of PSCs, especially for energy-poor communities, this work supports a just energy transition, promoting equitable access to renewable energy through more efficient and reproducible perovskites solar cells.

Advisor

Tonio Buonassisi, Professor, Mechanical Engineering

Direct supervisor

Tianran Liu, Postdoctoral Associate, Research Laboratory of Electronics
2024

Trent Lee

Materials Science and Engineering

Headshot of Trent Lee

Research projects

The current production process of aluminum, which is heavily used in the manufacturing of automobiles, drink cans, and electrical wiring, is problematic because of the large quantities of hazardous waste it generates. My project is investigating the viability of nanofiltration as a method for purifying this waste cryolite stream to recycle the aluminum that is otherwise unused. From experimental data, I have achieved significant aluminum retention (>98%), while separating it out from 70-95% of other metal species—a result that would reduce hazardous waste and enhance aluminum’s circular economy.

Advisor

John H. Lienhard, Abdul Latif Jameel Professor of Water, Mechanical Engineering

Direct supervisor

Zi Hao Foo, Graduate Student, Mechanical Engineering
2024

Erick Liang

Nuclear Science and Engineering

Headshot of Erick Liang

Research projects

Additive Manufacture (AM) with Laser Powder Bed Fusion (L-PBF) is an emerging technique enabling rapid development of fusion system components in configurations otherwise unachievable through traditional manufacturing techniques. However, thermal stresses induced due to rapid heating and cooling cycles during the printing process can distort the build plate, particularly larger parts. Newly developed underlying support structures first tested on an LCD-based stereolithography (SLA) photopolymer resin printer decouples the stress transfer reducing build plate distortion in L-PBF. Use of these support structures during L-PBF of an existing reactor component reduced distortion by 40% compared to the component printed without the support structure.  These support solutions will be implemented in future L-PBF prints to improve precision of future fusion components.

Advisor

Stephen J. Wukitch, Principal Research Scientist, Plasma Science and Fusion Center

Direct supervisor

Andrew Seltzman, Research Scientist, Plasma Science and Fusion Center
2024

Elaine Liu

Mathematics

Headshot of Elaine Liu

Research projects

The rapid adoption of electric vehicles (EV) introduces higher demand for electricity, which stresses the power grid, especially when drivers come home from work in the evening. Our research recognizes diverse charging needs and power grid constraints and we designed a multi-layer coordination scheme to maximize social welfare for all market participants that include generators, demand aggregators, and EV owners. Our research shows that, given the right market structure and incentives, companies will optimize for their charger allocation and retail pricing in this way and ensure our power grid is efficient and sustainable.

Advisor

Marija Ilić, Adjunct Professor, EECS; Senior Research Scientist, LIDS
2024

Leala Nakagawa

Mechanical Engineering

Headshot of Leala Nakagawa

Research projects

Thin-film perovskite solar cells show high potential for cost-effective production and energy conversion efficiency, but they degrade quickly as their stability lags behind. To accelerate research on improving their stability, we are developing specialized equipment that tests large quantities of solar cell samples under lighting conditions similar to the sun’s illumination. This equipment would be used for high throughput experiments that could lead to development of market-ready perovskite solar cells.

Advisor

Tonio Buonassisi, Professor of Mechanical Engineering, Mechanical Engineering

Direct supervisor

Tianran Liu, Postdoctoral Associate, Research Laboratory of Electronics
2024

Vinn Nguyen

Mechanical Engineering

Headshot of Vinn Nguyen

Research projects

Perovskite solar cells offer a promising alternative to traditional silicon-based cells, thanks to their high efficiency and lower manufacturing costs. However, challenges remain in ensuring the reproducibility and long-term durability of these cells, particularly under real-world operating conditions. Our research focuses on investigating how various fabrication parameters—such as temperature and humidity—affect cell performance and stability. By addressing these factors, we seek to understand the reproducibility and enhance the stability of perovskite solar cells. Advancing the reproducibility and durability of perovskite solar cells is critical for the broader adoption of renewable energy, reducing dependence on fossil fuels, and accelerating the global transition to sustainable energy sources.

Advisor

Tonio Buonassisi, Professor of Mechanical Engineering, Mechanical Engineering

Direct supervisor

Tianran Liu, Postdoctoral Associate, Research Laboratory of Electronics
2024

Almira Nurlanova

Chemistry

Headshot of Almira Nurlanova

Research projects

The current state of the industry of synthesizing methanol is posing a threat to the environment, mainly due to the susceptibility of methanol to overoxidation to carbon dioxide, a greenhouse gas. In nature, however, metalloenzymes like methane monooxygenases (MMOs) have demonstrated capability to convert methane to methanol under mild conditions, such as ambient temperature. Our project is the development of a Molecular Organic Framework that could synthesize industrially valuable methanol, while reducing greenhouse gas emissions associated with current methods of methanol synthesis. This project has a potential to lower the carbon footprint in this industry, which will matter in the long run to create a green society.

Advisor

Heather J. Kulik, Lammot du Pont Professor of Chemical Engineering, Chemical Engineering

Direct supervisor

Husain Adamji, Graduate Student, Chemical Engineering
2024

Mairin O’Shaughnessy

Computer Science and Engineering

Headshot of Mairin O’Shaughnessy

Research projects

The material physics of graphite, a predominant component in lithium-ion batteries, are currently not well understood, slowing improvements in the development of battery technologies. We are developing a machine learning based image pre-processing pipeline to prepare graphite microscopy images for further analysis, removing noise from the data and identifying particles at different reaction stages. With a processed data set, further work to learn graphite properties can be expedited and more informed development of lithium-ion batteries at all stages of life is possible.

Advisor

Martin Bazant, Professor of Chemical Engineering and Mathematics, Chemical Engineering

Direct supervisor

Sam Degnan-Morgenstern, Graduate Student, Chemical Engineering
2024

Joshua Rivera Camacho

Mechanical Engineering

Headshot of Joshua Rivera Camacho

Research projects

A third of the nation’s electricity generation comes from boiling heat transfer, as well as nearly all of our refrigeration and air conditioning. However, little is known about boiling mechanics, as boiling is an erratic, difficult-to-measure process. This can lead to huge overheating issues which can lead to devastating crises. Though prediction of these crises is possible, it is limited due to lack of understanding of boiling mechanics. My research focuses on designing an experiment which investigates the effect of bubble agitation on heat transfer. By separating one boiling mechanic, we can construct more accurate and meaningful heat transfer models, and by continuing to investigate boiling mechanics, we can lower the price and environmental footprint of many essential power systems while also improving their efficiency.

Advisor

Matteo Bucci, Esther and Harold E. Edgerton Associate Professor, Nuclear Science and Engineering

Direct supervisor

Matthew Hughes, Postdoctoral Associate, Nuclear Science and Engineering
2024

Sebastian Rotella

Chemical Engineering

Headshot of Sebastian Rotella

Research projects

Carbon capture and storage (CCS) technologies are a promising solution to addressing the substantial emissions originating from hard-to-abate industries. However, there are many existing CO₂ capture systems, and some may be better suited depending on the properties of the flue gas stream. We are developing process simulations of existing and emerging CO₂ capture systems to evaluate their cost and performance across different industrial flue gas streams, and in doing so we will identify which CO₂ capture systems are best suited for specific industrial processes. By benchmarking the cost-performance analysis of the various CO₂ capture systems, we hope to guide future implementation of CCS technologies to be as cost effective and energy efficient as possible.

Advisor

Robert Stoner, Founding Director, Tata Center for Technology and Design

Direct supervisor

Bosong Lin, Postdoctoral Associate, MIT Energy Initiative
A significant challenge in the battle against climate change lies in mitigating the substantial greenhouse gas emissions originating from hard-to-abate industrial sectors, which collectively contribute to nearly one-third of global emissions. Among the promising solutions to address these emissions, carbon capture and storage (CCS) technologies stand out as crucial decarbonization enablers by being able to significantly reduce emissions from existing industrial plants without disrupting vital industrial processes. However, since many of the industrial emissions are at high temperatures (300 to >1,400°C), conventional CCS technologies require cooling the flue gas to enhance the capture efficiency, which in turn requires more energy and leads to wasted low-grade heat. We are developing process simulations of emerging CCS technologies (such as molten salt) that offer the potential to operate the capture process at temperatures closer to those of the emissions. By evaluating their cost and performance across different industrial flue gas streams in comparison to conventional CCS technologies, we will identify which CCS technologies are best suited for specific industrial processes and help guide the growing implementation of CCS.

Advisor

Robert Stoner, Founding Director, Tata Center for Technology and Design

Direct supervisor

Bosong Lin, Postdoctoral Associate, MIT Energy Initiative
2024

Sonia Seliger

Economics and Finance

Headshot of Sonia Seliger

Research projects

To achieve its ambitious renewable energy goals, New York State has implemented numerous incentives and policies for including managing battery storage in the energy market. Our project researches how market participants are establishing and utilizing battery storage under these incentive structures by documenting these policies, analyzing the scale of battery investments, and investigating the business models that enable battery owners to profit from these investments. This allows us to gauge the effectiveness of these policies and inform future strategies and market designs to encourage investments in battery storage and a transition to lower-carbon energy systems.

Advisor

John Parsons, Senior Lecturer, Sloan School of Management; Deputy Director for Research, CEEPR
2024

Sokh Visal Soeun

Artificial Intelligence and Decision Making

Headshot of Sokh Visal Soeun

Research projects

As the Indonesian government licenses plots of lands called concessions to palm oil farmers, concession owners have cut down trees to clear land for their plantations, to the point that deforestation due to palm oil has become a leading cause of forest loss in the country. Our team proposes that the concessions neighboring each other share tools, labor, and technology with each other, and this so-called “network effect” leads to increased deforestation rates across all involved concessions. We are developing models that quantify this relationship and hope to use the models to develop policies to reduce the deforestation rate due to network effects in Indonesia.

Advisor

Saurabh Amin, Professor, Civil and Environmental Engineering

Direct supervisor

Rohit Parasnis, Postdoctoral Associate, Civil and Environmental Engineering
2024

Emilia Szczepaniak

Electrical Engineering and Computer Science

Headshot of Emilia Szczepaniak

Research projects

Applying machine learning algorithms to select capping layers for efficient and stable perovskite solar cells

Nonrenewable energy sources raise global temperatures and accelerate carbonization, demanding diverse, accessible clean energy solutions to combat climate change. At the Accelerated Materials Laboratory for Sustainability, we are studying perovskite solar cells (PSC), an alternative to commercialized silicon solar cells, and experimenting the effect on power efficiency from the cells’ 2D capping layer materials suggested by machine learning algorithms. Interpreting power efficiencies of 2D PSCs with machine learning helps answer the open-endedness of possible encapsulation materials to research; this brings us closer to finding reproducible methods that can commercialize effective PSCs and expand clean energy solutions in the long run.

Advisor

Tonio Buonassisi, Professor, Mechanical Engineering

Direct supervisor

Tianran Liu, Postdoctoral Associate, Research Laboratory of Electronics
2024

Catherine Tang

Electrical Engineering and Computer Science

Headshot of Catherine Tang

Research projects

Transportation is the largest contributing sector to carbon emissions in the United States, highlighting the critical need for effective roadway interventions to mitigate its environmental impact. Evaluating the effectiveness of these interventions requires models that accurately capture human driving behaviors. However, modeling human driving presents significant challenges due to the complex interplay of factors such as inter-vehicle dynamics and human decision-making processes. We seek to build realistic human driver models using real-world human driving data and generative machine learning techniques, formulating the challenge as a next-token prediction task. Our next-token prediction model combines interactions between vehicle trajectories, road topology, and upstream traffic dynamics to achieve realistic and scalable agent-based traffic flow simulations. With a more realistic simulation of human driving behavior, researchers can study roadway interventions such as eco-driving to reduce the impact of emissions from transportation.

Advisor

Cathy Wu, Associate Professor, Civil and Environmental Engineering

Direct supervisor

Vindula Jayawardana, Graduate Student, Electrical Engineering and Computer Science
2024

Jordan Tierney

Materials Science and Engineering

Headshot of Jordan Tierney

Research projects

Hydrogen has a wide variety of important industrial applications, from fuel to chemical production, however the current dominant production method results in climate-warming carbon dioxide emissions. We are developing a reactor for methane pyrolysis, a pathway which utilizes high-temperature chemical reactions to turn methane into hydrogen and solid carbon. Solid carbon is a preferable byproduct to carbon dioxide, as it can be collected and sold for use in other applications, rather than being released into the atmosphere.

Advisor

Asegun Henry, Associate Professor, Mechanical Engineering

Direct supervisor

Seiji Engelkemier, Graduate Student, Mechanical Engineering
2024

José Vargas

Physics, Electrical Engineering and Computer Scien

Headshot of José Vargas

Research projects

Energy forecasting is crucial for addressing grid instability, as inaccuracies in predicting demand and generation can lead to power outages or energy overproduction. This results in inefficiencies, higher costs, and increased environmental impact. Inaccurate forecasts can force reliance on backup power sources, often fossil fuel-based, which increases greenhouse gas emissions. Additionally, overproduction may lead to unnecessary energy waste, further straining natural resources. Using Python packages and probabilistic machine learning models, such as AutoTS and Bayesian neural networks, this research improves energy demand and generation predictions. The models address uncertainties like randomness in energy generation and errors in forecasting by validating predictions with real-world data. Accurate forecasting helps integrate renewable energy, reduce fossil fuel reliance, and minimize energy waste. It ensures more reliable and sustainable energy grids, preventing outages and supporting a just energy transition.

Advisor

Anuradha Annaswamy, Senior Research Scientist, Mechanical Engineering

Direct supervisor

Vineet Jagadeesan Nair, PhD Student, Mechanical Engineering
2024

Vandell Vatel

Artificial Intelligence and Decision Making

Headshot of Vandell Vatel

Research projects

New England aims to be net zero in terms of carbon emissions by 2050 to aid in a global effort to curb the effects of global warming. The MIT Energy Initiative’s GenX model is a tool for identifying cost-efficient portfolios of generation capacity. My project focuses on fine tuning GenX so that the model it generates more accurately mirrors New England’s electric grid. The more accurate the model, the more we can trust GenX’s investment decisions, and the more reliable of a resource it becomes.

Advisor

John Parsons, Senior Lecturer, Sloan School of Management; Deputy Director for Research, CEEPR
2024

Annika Vivekananthan

Artificial Intelligence and Decision Making

Headshot of Annika Vivekananthan

Research projects

It’s challenging to efficiently route vehicles through complex, ever-changing city road networks, but applying transformer-based machine learning models to non-Euclidean transportation data can help overcome this difficulty. By refining and adapting neural combinatorial optimization techniques, our work aims to deliver more reliable and cost-effective routing solutions. Ultimately, this research could streamline urban logistics, reduce congestion and emissions, and pave the way for more sustainable, data-driven transportation systems.

Advisor

Cathy Wu, Associate Professor, Civil and Environmental Engineering

Direct supervisor

Yining Ma, Postdoctoral Associate, Laboratory for Information and Decision Systems
2024

Audrey Wei

Artificial Intelligence and Decision Making, Math

Headshot of Audrey Wei

Research projects

The unpredictable rheological properties of soft solids, such as biomass fuel slurries, impede efficient renewable energy conversion and pose challenges for modeling geophysical flows like lava and mudslides. We utilize neural networks to extract and simulate the physical properties of soft solids from video footage, integrating physics-based simulations for real-time adaptability and enhanced predictive accuracy. Leveraging video-based techniques such as 3D reconstruction methods and physics-based models, our approach enables the identification of material properties like viscosity, elasticity, and flow dynamics. These properties are then incorporated into standard constitutive models, ensuring accurate simulations of real-world behaviors under diverse conditions. This research supports scalable renewable energy by enabling optimized biomass energy systems that are both efficient and reliable. Additionally, the insights gained from modeling geophysical flows contribute to improved disaster preparedness, mitigating risks and safeguarding vulnerable communities. By advancing our understanding of material behavior under diverse conditions, this work addresses critical challenges in renewable energy and environmental resilience.

Advisor

Crystal Owens, Postdoctoral Fellow, Computer Science and Artificial Intelligence Lab

Direct supervisor

Wojciech Matusik, Professor, Electrical Engineering and Computer Science

unfiltered: all results